Quick Links - Also see the menu above and more choices on the right side of the blog (too much, but all good stuff)

\/ ...and now BIMbuilder.com Blog Posts... \/

Saturday, February 28, 2009

Autodesk Binding Hotfix Utility - Activation issue - Mac Fix?

Autodesk Binding Hotfix Utility: "Autodesk Binding Hotfix Utility /

Mac Fix??????? (3/1/09 Apparently yes ~ Yes, this is a fix for those of you using a Mac!! THANK YOU AUTODESK FOR DOING SOMETHING ABOUT IT! I have been re-registering for a long time, finally it just works! -www.therevitkid.com

Revit® Architecture 2008/2009
Autodesk® Revit® Building 8
Revit® Structure 2008/2009
Autodesk® Revit® Structure 1/2/3

Published date: 2009-Feb-09 ID: DL5620053
This update corrects a problem that requires you to reactivate your Autodesk® product whenever you restart it.

Description of Problem

After you activate and then restart your product, you receive error 0.1.0011 or 11.1.6011 and are required to reactivate.

This problem can occur for Autodesk's 2007-based products on computers with SATA Raid controllers.

Note: This update must be applied to all computers that share a license. Therefore, if you apply this update to one computer and then want to use the Portable License Utility to transfer the license to another computer, be sure to install the update on that computer, too.

If this update is applied to a computer that does not have a SATA Raid controller, the license on that computer will be broken. You will need to reactivate the product to repair the license.
Affected Products

AutoCAD 2007/2008/2009-Based Products

Readme (html - 6Kb)

AutoCAD 2006-Based Products

AdskBindHotfix.exe (exe - 474Kb)

Readme (htm - 4Kb)

After you activate and then restart your product, you receive error 0.1.0011 or 11.1.6011 and are required to reactivate.

This problem can occur for Autodesk's 2006 & 2007-based products on computers with SATA Raid controllers.

Note: This update must be applied to all computers that share a license. Therefore, if you apply this update to one computer and then want to use the Portable License Utility to transfer the license to another computer, be sure to install the update on that computer, too.

Important: If this update is applied to a computer that does not have a SATA Raid controller, the license on that computer will be broken. You will need to reactivate the product to repair the license.



Installation Instructions

To install the Autodesk Binding Hotfix utility

1. Close all applications and log in as Administrator.
2. Download the BindHotfix_2007.reg file to a location on your local computer.
3. On your local computer, find and double-click the BindHotfix_2007.reg file that you downloaded.
4. Click Yes when prompted, 'Are you sure you want to add this information...'

A message will indicate when your product(s) have been successfully updated."

1 comments:

The Revit Kid March 1, 2009 at 4:06 PM  

Yes, this is a fix for those of you using a Mac!! THANK YOU AUTODESK FOR DOING SOMETHING ABOUT IT! I have been re-registering for a long time, finally it just works!

-www.therevitkid.com

  © Blogger template ProBlogger Template by Ourblogtemplates.com 2008

Back to TOP  

[Valid Atom 1.0]